Audio Technica m50x vs Beyerdynamic Dt 770 – Which One Is Best

Some people may wish to choose the Audio Technica m50x or Beyerdynamic dt 770 and can find it difficult since the two headphones perform the same function and may look similar at times. It is essential to know which headphones to choose that suit your desires.

Are there differences between Audio Technica m50x or Beyerdynamic dt 770? Yes, there are some similarities and differences between the two headphones. For example, they differ in terms of frequency response, impedance, among others.

The article compares the key features of the Audio Technica m50x and Beyerdynamic dt 770. It also highlights the differences as well as some benefits and cons. You’ll also find answers to FAQs on these headphones.

A quick comparison table between Beyerdynamic dt 770 and m50x

ComparisonBeyerdynamic dtAudio Technica m50x
Impedance32 ohms, 80 ohms, or 250 ohms38 ohms
Frequency response5Hz to 35000 Hz15Hz to 28,000 Hz
Sensitivity98db. 99dB
Weight270grams285g this is without a connector and a cable
AccessoriesEarcups are not foldableEarcups are foldable, 6.3mm screw-on adaptor, and a protective sleeve
Cablea non-detachable cableInterchangeable cables, coiled 3.9’-9.8’cable

Differences between Beyerdynamic dt 770 and m50x

Audio Technica m50x vs Beyerdynamic Dt 770

The following are some of the differences between the two devices;

  • Impedance

The M50X has a 38-ohm input resistance, but the Beyerdynamic dt 770 has 32, 80, or 250 ohms, making the latter more convenient to use with a headphone amp. As a result, when looking for the best headphones to utilize, it’s crucial to consider the impedance.

  • Response to frequency

The Beyerdynamic dt has a frequency response of 5 to 35,000 Hz, whereas the Technica M50X has a frequency response of 15 to 28,000 Hz, which is higher than the human sensory range of 20 to 20,000 Hz in both cases.

  • Sensitivity

The sensitivity of the headphones is crucial. The sensitivity of each headphone varies slightly, with the Beyerdynamic dt 770 having a sensitivity of 98 dB and the M50X having a sensitivity of 99 dB

  • Weight

You won’t have to worry about the heaviness of these headsets because they’re both relatively compact. To feel the heaviness of the pair, you’d have to use them for a few hours. Without the cords, the DT770 weighs 270 grams, while the ATM50x weighs 285 grams.

  • Accessories

Instead of remote control and microphones, the Audio Technica M50X comes with Earcups, is foldable, has a 6.3mm screw-on adapter, and a protective sleeve that increases its performance. The DT770 has Earcups that are not foldable; volume controls built into the cord and a condenser microphone for audio input. The DT770 only comes with a protective bag microphone with an omnidirectional polar pattern, meaning it can pick up sound from all directions.

  • Cables

The wires are another significant design change. The M50x features a detachable cable. However, the DT770 does not. Headphones with removable cords have a longer lifespan. They allow you to easily replace the line, which is typically the most vulnerable component of the headphones.

Any harm to a non-detachable cord necessitates the purchase of a new one typically. However, the DT770 comes with a pretty sturdy chord, but it would be preferable if it were removable.

  • Lows

The punch is noticeable when playing a groove track on the M50x. The bass is well-emphasized, and the sub-bass is well-produced. You may rest assured that no minimal impedance elements in your song are available. Bass heads and fans of rap music, trapping, and EDM songs will enjoy it. The minimal tone of the DT770, on the other hand, is equal. It has a more natural-sounding overall sound.

Similarities between Beyerdynamic dt 770 and m50x

Similarities between Beyerdynamic dt 770 and m50x

Here are some of the similarities. Would you please read all of them to obtain positive information?

  • Control buttons

Unlike Bluetooth headphones, neither the Beyerdynamic DT770 nor the M50x headsets include control buttons.

  • Increased sound volume

Although the M50X is significantly thicker than the Beyerdynamic dt 770, both headphones provide similar levels of tight noise isolation. The M50X is a little more comfortable, but it’s also a little more expensive.

  • Additional packing

Both headphones come with a small set of accessories in the box. Three new headphone cables come with the Beyerdynamic dt 770, which features an in-line mic and control. Both the M50X and the M50 come with a stereo converter plug and a carrying case.

Pros Cons of beyerdynamic dt 770

Because of its tighter fit, it is ideal for people who move around a lot.
It features clean and sharp mids, suitable for rock, classical, and other live music genres.
Its cord is not detachable, making it difficult to replace if it becomes damaged.
Because the earcups do not fold, they take up room when not in use.

Pros Cons of m50x

Natural sound reproduction.
Design and fabrication of the most robust frame.
Capabilities for microphone and volume control.
The listening experience is louder.
The sensitivity rating is high.
High-frequency reproduction.
The competitor’s sound separation is inferior.
A low-end rendition that is softer
Ear Cups made of foam are delicate.
Buying guide for the two devices.

Buying guide for the two devices

  • sensibility

It is what you should look for in your headphone’s characteristics if you prefer to listen to music blasting. The intensity of your headphones determines how loud they can be. The majority of headphones are approximately 98dB and avoid anything less than 80dB.

  • Resonance

The amount of power necessary for a headphone to function is known as impedance. Most mobile devices have adequate ability to send the appropriate authority to the headphones, but those with lower impedance can use the full power to deliver excellent sound.

  • Frequency Reaction

The headphone’s frequency response refers to the range of frequencies it can produce, with the lower limit being bass and the top limit being treble. Most headphones have a frequency response of 20 Hz to 20000 Hz. If you prefer more excellent bass, look for a device that can support a more extensive frequency response range.

You might be interested to read also our another comprehensive article of:

Audio Technica athmsr7 vs M50x- Which One to Pick? and Audio Technica Ath m50x vs Sony Mdr 7506- Compare Them Completely

Frequently asked questions:

  • Which is the most recommended between Audio Technica m50x and Beyerdynamic dt 770

If you enjoy a variety of genres, the Beyerdynamic dt770 is a better pick. If you listen to music with many natural instruments, it will also be a better choice. The audio Technica 50x is ideal for bass-heavy music.


Before buying any headphones between Audio Technica m50x and Beyerdynamic dt 770, please read the article above. See all the similarities and differences existing between the two machines. Proceed to choose the best that suits your desires.

Also, take some precautions when using headphones. For instance, clean them more often and ensure they are in good condition. Finally, consider some factors such as sensitivity, impedance, and frequency response before buying the headphone.

Leave a Comment