Connecting or running the two 16 ohm speakers to one output or the amplifier is not a simple process. It requires at least one to know how to work speakers and connect them either in series or parallel. Therefore, you need to have some steps that will guide you on connecting two speakers to one output or one amplifier. Connecting two speakers to one amplifier will help you have better quality sound when playing your music.
The process of connecting or running two speakers to one output is the amplifier useful to anyone when you want to connect the speakers either in parallel or in series. Connecting the two speakers in parallel or series is useful when you don’t want to have separate volume controls of individual speakers or when you don’t want to turn the individual speakers on and off separately.
The article is all about the steps and procedure to connect two 16 ohm speakers to one amplifier. The article provides all the details on connecting these two speakers to one amplifier, either in series or parallel, for you to have quality and better sound. Therefore for the process to be complete, you have all the necessary tools to ensure that the process is a success. The last part of the article is the conclusion which summarizes all the steps.
How to connect two 16 o-hm speakers
The two speakers could be connected either in series or parallel, and the connection should depend on the speakers’ impedance. The speaker impedance is usually written at the back of the speaker, but in our case, the speaker impedance is 16 ohm; therefore, these speakers can be connected either in series, parallel, or both parallel and series.
Techniques to use when running 16 ohm speaker off an amp;
| Methods to use | function | Essential products |
| Series connection using amplifiers | uses less power | Check Amazon for the best amplifiers |
| Parallel connection | it is easy to connect | |
| Both series and parallel connection | combines all the ideas |
1. Connecting two 16 ohm speakers in parallel to an amp
Connecting two speakers in parallel requires at least speakers with not less than 8 ohms. But now, for our case, the speakers are rated 16 ohms; therefore, it is safe to connect them in parallel. It is safe since both speakers will have an impedance of 8 ohms when connected in parallel.
i. The first step before performing any process is to check on the total amp impedance to know the minimum required load. You should ensure that the minimum load is 4 ohms.
ii. Ensure also that you have enough black and red wires that you will use to connect it to the amp and the speakers.
iii. Connect the red wires to the speakers’ positive terminals and the amplifier.
iv. Connect the black wire to the terminals of the speakers and the amplifier. You should make sure that the red and black wires connect to terminals of the speakers and amp in one that is parallel.
v. Connecting speakers this way is said to be parallel since they were wired in parallel.
2. Connecting the two speakers in series
Since the amplifier we are using in our case has total load impedance, allowing us to connect the two speakers in series without any problem. The two 16 ohms speakers will have a total load impedance to the amp of 16 ohms. Most of the amplifiers work the best load of 6-16 ohms, making our process successful. Therefore, you must check the rated load impedance of the amplifier before connecting speakers to the amplifier.
i. Ensure that you have enough wires that help you to complete the process.
ii. Connect the red wire into the positive terminal of the amp and connect the same wire into the positive terminal of the first speakers.
iii. Take the black wire, connect it to the first speaker, and connect the wire to the speaker’s positive terminal.
iv. Take the last wire to connect it to the amp’s negative terminal and connect it to the negative terminal of the second speaker.
v. Now the circuit is complete, and the speakers will have been connected in series in the process. When you connect the two speakers in series, and one speaker fails, the circuit will not be complete, and therefore you will not be able to play and listen to music.
3. Connecting the two 16 ohm speakers in series and parallel
Parallel and series connection is difficult because you need to do some calculations on the overall impedance. You can change different load impedance of the speakers depending on how you wire and connect the speakers to the amplifier. Since the speakers are of the same ohms, that is, the 16 ohms, calculating the overall impedance is taking the impedance that you get when you wire the speakers in series and dividing it by the impedance you get from the parallel connection.
i. Take two red wires that you will use in the positive terminals of both the speakers and the amplifier.
ii. Connect the two red wires and connect them to the positive terminal of the amp and connect them directly to the positive terminals of the two speakers
iii. Complete the circuit by connecting the wires. You can add a speaker whenever you want in the middle of the two speakers. Connecting the speakers in series and parallel will either increase or decrease the load impedance of the amplifier.
Conclusion
Connecting two 16 ohms or any other type of speaker is a simple process when you follow the above steps and method of connecting such kinds of speakers. Connecting speakers either in parallel or series will depend on the load impedance on your amp. There are three methods or ways that you can use to connect your 16 ohms speakers that are parallel, series, or both parallel and series.
Finally, if you want to run your speakers in any output, the most important thing to consider is to know how to calculate the total load impedance that the speakers will put to the amp and know the minimum load your amplifier will support. It is crucial that you use the amp impedance to help you know the best and suitable way that you will use to connect such speakers either parallel or series.